Purchase by Phone: 1.877.823.7576

30 days money back guarantee
Limited time Offer:
2 Years Warranty

master cardamexvisadiscover

Smart Tweezers LCR-meter: the History of Evolution

Now You Can Purchase Smart Tweezers Spare Parts

Smart Tweezers Pre-production Prototype

  • Responsive image
    Top View
  • Responsive image
    Bottom View

Prototypes of Smart Tweezers have been designed back in early 2000s. One of the latest pre-production demo units had a hand-carved housing and hand-made tweezer-type probes. The design was using Atmel AT90S4433 8-bit Microcontroller with 4K bytes of In-System programmable flash memory. This is a high-performance and low-power AVR�� 8-bit RISC Architecture processor. The unit was powered by AA alcaline battery

  • Responsive image
    Top View
  • Responsive image
    Top View

It is obvious that in the course of the design evolution the components also evolved quickly so that in about 2003 Smart Tweezers finaly were looking somewhat close to what it is today. The latest pre-production units have been nanufactured using 3D printing.


Smart Tweezers Pre-production 3D Printed Housing

  • Responsive image
    Top View
  • Responsive image
    Top View

Smart Tweezers ST-1

  • Responsive image
    Top view
  • Responsive image
    Bottom View

ST-1 is the first commercially released model of Smart Tweezers in 2004. This model had rubber insulated handles, an LCD display and moulded plastic body.


Smart Tweezers ST-2

In model ST-2 significant improvements had been achieved in both accuracy and mechanical design. Replaceable tweezer tips had been introduced as well as a better insulation of the handles released in 2007. Initially it was a ROHS complient device but due to LCD soldering problems we eventually changed the display.

  • Responsive image
    Top View
  • Responsive image
    ST-2 Measuring Capacitance
  • Responsive image
    Detailed fragment of ST-2 Tweezer Probes
  • Responsive image
    ST-2 Tweezer Probes Side View


Inductive Charger STIC Kit

In 2009 an Inductive Charging Kit, the STIC, (Smart Tweezers with Inductive Charger) was introduced in order to address a problem of housing damage due to multiple replacement of batteries. When the button batteries were discharged, the device needed to be opened; this caused the plastic to wear and not close as tightly; the screws could also be damaged. This model was more expensive but was widely accepted on assembly lines.

Instead of replaceable batteries, users could replace them with a NiMH cell with inductive charger. When the device was placed on the cradle, a light would show that the device was charging. This upgrade was simple to do and extended the life of the ST-2 and ST-3 devices.

  • Responsive image
    Smart Tweezers STIC, Top view, Green Rechargeable NiMH Battery
  • Responsive image
    Smart Tweezers STIC, Bottom view, NiMH Battery and Ferromagnetic Core of Inductive Charger PCB
  • Responsive image
    Smart Tweezers STIC in the Charger Cradle with Wall Adapter
  • Responsive image
    Smart Tweezers STIC Charger Upgrade Kit for previous models of Smart Tweezers


Smart Tweezers ST-5

In 2011 the latest model ST-5 had been released featuring even better basic accuracy of 0.2% for R and 0.5% for LC. The higher accuracy was available due to a change from a 2-wire Kelvin connection from the tweezers to a 4-wire connection. The ST-5 was Li-Ion rechargeable batteries and micro-USB charging. This model offered users replaceable, Swiss-made precision tips, and a 4-way joystick-like navigation. Features included offset subtraction and component sorting. This model came with a hard-shelled carrying case, charging cable, and was calibrated to NIST standards with traceable calibration certificate.

  • Responsive image
    Smart Tweezers ST-5 Measuring Capcitance, Top View
  • Responsive image
    Smart Tweezers ST-5, What is in the Box: St-5, USB-Charger/Cable, Traceable Calibration Certificate, Printed Manual and Quick Reference, and Carrying Case


LCR-Reader

In 2013, Siborg released the first look at the LCR-Reader. This device was created as a lower-cost alternative to Smart Tweezers models, mostly aimed at customers who wanted a device like Smart Tweezers but without the higher price while not sacrificing the easy-of-use or basic accuracy.
This model was also first to debut a new look; a slimmer build than the ST-5, and only 1 oz., nearly half the weight. It also has a bright OLED display compared to the older LCD display. This design was eventually adopted for the ST-5S model.
Here is the Manual and the Quickstart Guides.
  • old and new smart tweezers
    Older Smart Tweezers ST-5 and new LCR-Reader/ST-5S redesign
  • whats in the box
    What came with LCR-Reader in the beginning


Smart Tweezers ST-5S

In 2014 Siborg released the Smart Tweezers ST-5S. This device was an updated take on the ST-5, with mostly the same features and functions but an updated look akin to the LCR-Reader. Here is the Manual and the Quick Reference for this model.
  • smart tweezers
    Smart Tweezers ST-5S new redesign, Top view
  • st5s box
    What comes with Smart Tweezers ST-5S

Smart Tweezers ST-5S Manual
Smart Tweezers ST-5S Quickstart Guide

Smart Tweezers with Bluetooth

In 2016, Siborg announced the availability of Smart Tweezers ST5S-BT, a Smart Tweezers ST-5S device with the added ability to remotely record measurement values in real time. The device connects using a USB dongle (required to connect to computers) or using dedicated apps for iOS and Android. Depending on which communication software you use to receive the data can be saved into a file or database for processing later or used a quick reference. The ability to automatically record measurements is a time-saver for those who require their measurements to be recorded for quality control.
  • bluetooth
    Smart Tweezers with Bluetooth, the ST5S-BT, allows users to record measurement results as they happen.
  • smart tweezersSmart Tweezers with Bluetooth Dongle; the dongle is required to connect to computer.
  • Tera Term Screen
    Free Tera Term Screen accepting data; the data is sent in a string of comma separated values that represent what is shown on the Smart Tweezers' screen at time of measurement


Smart LED Test Tweezers

Siborg began offering the LED Test Tweezers in November 2015. This device uses tweezer-probes to measure LEDs and other components. With the included cable, LED Test Tweezers can connect to most multimeters and be used as tweezer probes. The phosphor-gold tips are able to grasp and hold small components, and a ring-light around the device confirms a connection. The Smart LED Test Tweezers measure LEDs with a current rating of 12VDC and variable current ratings of 20, 10 and 5 mA.
  • Smart LED Test Tweezers
    Smart LED Test Tweezers test LEDs, circuits, fuses and other components
  • Smart LED Test Tweezers Plugged in
    Smart LED Test Tweezers connect to most multimeters using the included connection cable; this allows the device to measure SMT components with tweezer probes
  • Everything that comes with LED Tweezers
    Everything that comes with Smart LED Test Tweezers; a carrying case, tweezer cap and multimeter connector cable
  • Smart LED Test Tweezers labels
    Labelled Smart LED Test Tweezers; click for larger picture
  • Smart LED Test Tweezers Probes
    Smart LED Test Tweezers Phosphor-gold tweezers

  • 2nd Generation Smart Tweezers with Bluetooth ST5S-BT2

    The 2nd generation Smart Tweezers ST5S-BT2 were made available from Siborg in Spring 2017. This model utilizes the same features and functions on Smart Tweezers ST-5S and the original Bluetooth model with the added ability to send and receive data to/from the device.
    This model allows users to set up the device remotely to match previous measurement specifications. The ST5S-BT only allowed the device to send measurement data to the receiving software. ST5S-BT2 lets users create a measurement profile with the required specifications; the receiving software will automtaically determine if the component meets these specifications and grants a pass or fail. This ability is ultimately favourable for production lines where time is a factor.
    The ST5S-BT2 has dedicated software for PC, iOS and Android and works with most receiving software including National Institute's LabView and free software such as TeraTerm. Using available USB Bluetooth receivers, the Bluetooth Smart Tweezers devices can be integrated into custom user environments. The receiver is based on FTDI bridge and creates a virtual RS232 serial port, allowing for easy connection.
    • Smart Tweezers BT2 with Dongle
      Everything included with the Smart Tweezers Bluetooth BT2

  • Smart Tweezers BT2 with Labview Connectivity
    Data received by NI LabView
  • Smart Tweezers BT2 Companion Connectivity
    Data received with BT2 Companion App

  • LCR-Reader-MP

    Siborg released their ultimate debugging tool, the LCR-Reader-MP in the September 2017. This device offers the highest basic accuracy of 0.1% and the most features on any of their devices. These features include an oscilloscope mode, which hasn't been included since Smart Tweezers ST-1, Super Cap mode, AC/DC voltage measurements, LED and diode test, signal generation, pulse counting, frequency measurements and more.
    • LCR-Reader-MP
      LCR-Reader Multipurpose
    • MP Jogwheel
      Navigational Jogwheel
    • LCR-Reader-MP Oscilloscope Mode
      Oscilloscope Mode on LCR-Reader-MP


    LCR-Reader-MPA

    In the summer of 2019, Siborg released the LCR-Reader-MPA, a new version of the previous LCR-Reader-MP. The new model featured a full redesign of the device; it is smaller than the MP and nearly 1.5 times lighter at 30 grams. The MPA has new tweezer handles and new tips which provide more stable alignment and contact with components. The screen, while smaller, provides easier reading with larger graphics. This model uses the 4-way joystick-like navigational button instead of a jog-wheel. Three test signal levels were added: 0.1, 0.5 and 1 Vrms. The signal source resistance was reduced to 100 Ohms allowing for better test of smaller resistances and inductances and larger capacitances. There are two versions of backlit LCD available: with a grey screen or black screen.
    • LCR-Reader-MPA
      LCR-Reader-MPA with blue housing
  • Oscilloscope modeA
  • Diode mode on LCR-Reader-MPA
    Diode mode


  • Purchasing Info

    Siborg Systems Inc.

    Siborg Systems Inc.
    24 Combermere Crescent
    Waterloo, ON N2L 5B1 Canada

    smarttweezers@siborg.com


    30 days money back guarantee.
    Limited time Offer: 2 Years Warranty

    How to Purchase

    You may place your order in one of the following ways:


    Fax: 519.725.9522
    Phone: 519.888.9906
    Toll free: 1.877.823.7576


    Smart Tweezers Spare Parts   Smart Tweezers LCR-Reader   History of Digital Multimeter  
    Smart Tweezers vs LCR-Reader   Legacy Smart Tweezers ST-1   History of Smart Tweezers